PARK TOOL 758.2 Cutter 1.5" for HTR1/HTR1B
Pricing
OUR PRICE £349.99
Currently Unavailable
Request email alert
BIKES FULLY BUILT
And PDI Checked
And PDI Checked
FREE DELIVERY
Over £20!
Over £20!
FREE INSURANCE
With Bikmo
With Bikmo
LOW COST FINANCE
With PayPal Credit
With PayPal Credit
FAST DELIVERY
Dispatched Within 5 Days
Dispatched Within 5 Days
SAVE UP TO 42%
With The Bike to Work Scheme
With The Bike to Work Scheme
About
Spec
- Options
- 1.5 inches Bronze Out Of Stock
- Description
- The Park Tool 758.2 will ream and face the head tubes of bikes that use the OnePointFive Interface Standard
- The 758.2 is designed for use with the Park Tool HTR-1 or HTR-1B Headtube Facer and Reamer
- Must also be used with the 750 Centering Cone Adapter to ensure correct alignment
- 1.9516-inch (49.57mm) diameter reamer/2.441-inch (62mm) facer
- Bores a machined surface to a depth of approximately 25mm and then faces the end of the headtube
- SHIS terminology: The 758.2 is for EC49 upper and lower headtubes
- Use with generous quantities of Park CF2 cutting fluid for best results and prolonged tool life
As with any product, specification is subject to change without prior notification. You are advised to confirm current specification before buying. We do not ship bikes with mudguards fitted due to the possibility of damage in transit.
Please also note that not all of our products on this website are kept at our showroom in Halifax, if you are wanting to come view a product, please call us first.
Please also note that not all of our products on this website are kept at our showroom in Halifax, if you are wanting to come view a product, please call us first.